Ballards KTM 125-520 SX / SXF Orange Front Braided Brakeline

These brake lines increase brake stopping power, while improving brake feel. Stock rubber lines expand on hard breaking, reducing brake effectiveness. Stainless braided brake lines do note expand. Coloured vinyl covering protects the brake line, fenders and body work etc from damage.

If we don't have it for your bike, we can get it made! Available for most off-road bikes.

Please Note: To ensure your personal safety and the warranty of these products, you must make sure the brake line is securely fastened on the fork protector of your bike. OEM brake line mounts are generally too large in diameter for most aftermarket braided brake lines, and as such must be replaced by aftermarket brake line clamps intended for thinner braided brake lines, or modify clamp and or brake line to ensure secure fastening. Even when aftermarket brake line clamps are fitted, it is still necessary to perform the following checks. Once everything is assembled and fastened, cycle through your fork travel several times paying close attention to the braided brake line position, in relation to all moving and non-moving parts - look for any movement between the braided line and protective sheathing also. After ensuring no movement under fork action, perform a static test of the product - tugging on the unsheathed section of the braided line with moderate force halfway between the brake line clamp and caliper, then again halfway between the brake line clamp and master cylinder banjo. If any movement at all is detected in any of these tests, it is a requirement to make modifications to the brake line clamping hardware, to ensure the brake line is completely secure. Re-run testing until brake line is secure. Failure to comply will void product warranty and could lead to injury or worse.

Browse more

• Browse all Ballards
• Browse all Ballards Front Brake Lines
• Browse all Front Brake Lines